Description
| Technical characteristics |  |
|
Blowing block
- technical producing capacity for 1.5 L, not less than 750 BPH;
- technical producing capacity for 5 L, not less than 350 BPH;
- number of press-form cavities, for 1,5L — 2;
- air pressure at the input 1,4-1,5 MPa;
- air consumption- not more than 45 nm3/ hour;
- supply voltage — 220 V, 50 Gz;
- power consumption not more than — 100 Wt;
- cooling water discharge (t 14 °C) not more than 2L/min.
Preform heating block
- producing capacity, for 1,5L not less than — 800 preforms/hour;
- supply voltage — 3x380V 50 Gz;
- power consumption not more than 8 kWt;
- number of heating zones — 4;
- lamp power — 1,8 kWt;
- number of installed infrared lamps — 8;
- operating personnel — 1 person;
- discharge of cooling water (t=14 °C ) — not more than 5L/min.
|
Overall dimensions of semiautomatic blowing machine’s blocks | |
|
Blowing block
- length — 1400 mm;
- width — 500 mm;
- height — 1700 mm;
- weight, not more than — 520 kg.
Preform heating block
- length — 880 mm;
- width — 500 mm;
- height — 1100 mm;
- weight, not more than — 190 kg.
|
Additional information | |
|
Resources of semiautomatic blowing machine VM-750, until the first overhauling are 2 years at the average annual operating time 4 800 hours.
No-failure operating time of semiautomatic machine is about 20 000 cycles. Working life of the machine, until the writing off is not less than 8 years.
Guaranteed storage time — is about 1 year in manufacturer conservation (package) at storage facilities (storage conditions 2 (C) GOST 15150).
Mentioned resources, working life and storage time are valid only at the consumer observance of requirements indicated in current maintenance documentation.
Equipment inquiries
Check the availability, cost and characteristics of the equipment by phone or email.